UPM SW Series Conveyors

Download Details in PDF format

The new UPM belt conveyor has a precision machined belt track with minimum joints ensuring smooth product flow without hold up points or ingress of product into the track.

• The drive system incorporates a large diameter sprocket ensuring maximum drive efficiency with minimum gap around the radius.

• The inlet and outlet of the track are reduced in height to keep a slim line profile down to the feed end to ensure the conveyor can fit under the machine allowing maximum clearance for product movement.

• The conveyor construction allows simple modification to the length or shape in lengths of 0.5, 1, 1.5, 2, 2.5 and 3m sections.

• The conveyor side frames are HMWPE which is durable, tough and fully suited to operation in an industrial environment. Mounted in a purpose designed aluminium profile frame on heavy duty lockable castors.

• As with all UPM conveyor systems the link belt does not require tensioning or tracking.

• The polypropylene link belt is impervious to oil, water and able to operate with product temperature of 104 °C.

TECHNICAL DATA

• Conveyor sides grey HMWPE.

• Conveyor belts grey PP 104°C temperature.

• Internal direct drive system.

• Standard motor speed 4.5m / minute.

• Conveyor width <211mm 25w 80mm motor.

• Conveyor width >249mm 40w 90mm motor.

• 3ph 400v 50hz power supply.

• Control manual motor starter IP55.

OPTIONS AVAILABLE UPON REQUEST

• Fixed speed motors 1— 9m/min.

• Fixed speed motors 1PH 240V 50Hz

• Variable speed Inverter 1PH 240v.

• Machine interface controls.

• Belt colours Blue, White & Black PP.

• Belt flights 25mm, 50mm & 76mm.

• External High torque IP67 motors

  Download printable Product Details in PDF format

Contact UPM about this product range