The overhead fans are mounted in stainless
steel covers and blow cool air onto the product being transported on the
conveyor underneath. The number of fans varies according the the length
and width of the belt and the amount of cooling required.
Underbelt Cooling Fans
Heat Exchanger Cooling
Conveyor
Located beneath the 22% open link
belt surface to blow ambient air onto product prior to discharge
into storage container.
Quantity of fans depends on belt
width and final product temperature required.
175mm dia steel die cast aluminium
frame with steel impeller.
Equipped with ball bearing and motor
stall protection by temperature sensor with automatic reset.
1ph 220v ac power supply.
Low noise 55 dBA.
Ambient airflow of 375 m3/h.
SK3217 HEAT EXCHANGER COOLING CONVEYOR
Located above the belt surface to
blow chilled air onto product prior to discharge into storage
container.
Chilled water supply from existing
unit.
Quantity of Units depends on belt
width and final product temperature required.
